Lynx L15ICE Manual descargar pdf (Pagina 9)

C. Setup

1. General

1. Make sure the unit is completely unpacked and that all shipping cartons, tapes and packing are

removed BEFORE operating the unit. Be careful not to damage the exterior panels when handling

the ice machine

2. Position the ice machine in a selected site. Clean the interior with soap and water and rinse

thoroughly.

3. Make water supply and drain connections (See "2. Water Supply and Drain Connections.")

4. Plug in the ice machine. (See "3. Electrical Connections.")

5. If this is a stand-alone installation, go to step 6. Otherwise, build in the ice machine. Slowly push the

lower part of the ice machine into place. Beware of adjacent equipment.

While building in the ice machine, do not damage the water supply and drain connections or the

power cord.

IMPORTANT

6. Level the icemaker in both the left-to-right and the front-to-rear directions.

7. The perimeter where the machine touches the oor should be sealed with silicone for sanitation.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Sin comentarios

Lynx L15ICE Manual Pagina 9